Envision L42H761 Manuale Utente

USER’S MANUAL We recommend that you take a few minutes to read carefully through this manual before installing and using the TV.

8MOUNTING THE TV BASEThe TV base will be separated with the TV unit. You should Install the base before you use the TV unit.1. Place the TV on its fa

9PREPARATIONPlease, make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord!1. Install the base stand

103. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AA 1.5V).4. Power:Insert the power cord in

11POWERPress to power ON/OFF (standby)TV.(Note:1.TV is never completely power off. unless physically unplugged.2.Press to turn on TV after the powero

12Press this button to display a list of available display for-mats. Available display formats are determined by the type of signal you are receiving.

13 Headphone HDMIPr Pb Y L RComponentS-VideoLine InPC L/RVGA15-pin D-SubOnce your equipment is connected, use the following procedure to view the inpu

14CAMERA CAMCORDER VIDEO GAMEHow to connect1. Connect the camera, camcorder and game set to the ports of the audio/video set. 2. The camcorder may

15•PresstheMENU button on the remote con-trol to display the Settings menu.- Use cursor up/down to highlight and select a menu item on the left pa

16Notes: • When you have locked TV channels before initiating Autoprogram, a message appears asking to enter your PIN code in order to complete Autopr

17Note: Digital Channel selection delay Due to the tuning complexity of subchannel digital programming, the time to select and view a digital chan-nel

FOR YOUR SAFETY ------------------------------------------------------ 1DECLARATION OF RoHs COMPLIANCE --------------------------- 3PRECAUTIONS AND RE

18Reset AV settings Select Reset AV settings with the cursor down key. Press the cursor right key. Press the OK button to erase settings and reset the

19Note: The captions do not always use correct spelling and grammar. Not all TV programs and product commercials are made for broadcast with Closed Ca

20This allows you to configure the way you choose to view digital captioning. Select one of the digital service channels made available by the captio

21Preferred channelsSelect Preferred channels with the cursor down key. Press the cursor right key to enter a list with all stored channel numbers. Se

22Select Picture in the TV Settings menu. Press the cursor right key again to enter the Pic-ture menu. Select the menu items with the cursor up/down k

23Sharpness This will adjust the sharpness of fine details in the picture.This will increase or decrease Warm (red) and Cool (blue) colors to suit per

24Manufactured under license from Dolby Laboratories. ‘Dolby’ and the double-D sym-bol are trademarks of Dolby Laboratories. This gives you the possib

25Select TV ratings lock with the cursor down. A list appears, showing the age-based TV ratings and a cor-responding content-based ratings list. Press

26When All has been selected, all items in the age-based and in the contents-based lists are locked. If, while All is selected, any other item, either

27Select Movie ratings lock with the cursor down. A list appears, showing all valid MPAA content ratings. Press the cursor right to enter the list. Yo

1FOR YOUR SAFETYBefore operating the TV please read this manual thoroughly. This manual should be retained for future reference.FCC Class B Radio Freq

28Region ratings lockThis allows you to clear all the locks that you have set in the Region ratings lock table. Clear regions lock12Select Region rati

29Select the menu language Press the MENU button on the remote control. Use the cursor down to select Installation in the Settings menu. Use the curso

30Picture menuColor temperature This will increase or decrease Warm (red) and Cool (blue) colors to suit personal preferences. Select Cool to give the

31Sound menuVirtual surroundSmart SoundPress the cursor right key to enter the list. Press the cursor up/down key to select a predefined sound setting

32TIPSCare of the screenDo not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently.Unplug the power

33BEFORE CALLING SERVICEPlease make these simple checks before calling service. These tips may save you time and money since charges for receiver inst

34GLOSSARYAudio / Video InputsLocated on the rear and the front of the receiver these connectors (RCA phono type plug) are used for the input of audio

35PRODUCT SPECIFICATIONFeature42” Wide screenFull HD (1920x 1080) ResolutionHigh Brightness (500 cd/m2)High Contrast Ratio (1500:1)Wide Viewing Angle

2SYMBOL SYMBOL DEFINITIONSA 1965DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended

3DECLARATION OF RoHs COMPLIANCEThis product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament

4PRECAUTIONS AND REMINDERSPlace unit on even surfaces. Don’t place the TV in confined spaces or in a box when using it.Unplug immediately if is malfun

5Remember to unplug the AC cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the display.Avoid direct s

6IMPORTANT SAFETY INSTRUCTIONSRead before operating equipment1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow

718. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cab